Towable Boom Lift for Tree Care: How to Choose a Model
A towable boom lift for tree care can suit crews that need vertical height, horizontal reach, and a machine that can move between jobs on a trailer. The useful starting point is not the largest model. It is the route into the site, the position where the machine can be set up, the height and side reach of the work, and the total platform load. A lift that reaches the branch on paper can still be a poor match if it cannot enter, turn, park, or work from the available ground.
Begin with the work area
Tree care sites rarely offer a clean, open setup area. A driveway may be narrow, the ground may be sloped, and branches may sit behind a fence, pond, garden, wall, or structure. Walk the route from the road to the intended setup point before comparing models. Record the narrowest opening, the tightest turn, and any surface that may restrict access.
- Measure gates, driveways, turns, parking space, and the proposed setup area.
- Mark the highest work point and its horizontal distance from the setup point.
- List the people, tools, and materials that must be carried on the platform.
- Note overhead lines, soft ground, slopes, protected landscaping, and site access rules.
- Confirm the towing vehicle, delivery route, storage space, and local towing requirements.
This article is a model-selection guide, not an operating procedure. The current machine manual, local requirements, operator training, and the job-specific safety plan take priority during use.
Compare all five Coman models
Coman lists five towable models from the T08 to the T16. Each model has a listed platform load of 200 kg. Working height, horizontal working radius, machine weight, and platform size change across the range.
| Model | Max. working height | Max. working radius | Machine weight | Platform size |
|---|---|---|---|---|
| T08 | 10 m | 5 m | 1,490 kg | 0.9 x 0.7 m |
| T10 | 12 m | 5.5 m | 1,550 kg | 0.9 x 0.7 m |
| T12 | 14 m | 5.9 m | 1,640 kg | 0.9 x 0.7 m |
| T14 | 15.8 m | 6.1 m | 1,900 kg | 1.2 x 0.7 m |
| T16 | 17.85 m | 6.6 m | 1,980 kg | 1.2 x 0.7 m |
Working height and platform height are different measurements. For example, the T08 lists a 10 m working height and an 8 m platform height. Define the actual work point and ask for the complete model datasheet when a job has a fixed height, clearance, or reach requirement.
Choose by height and horizontal reach
Tree work often involves reaching beside or around a canopy rather than moving directly upward. The listed working radius increases from 5 m on the T08 to 6.6 m on the T16. That difference may matter when the setup position must remain outside a fence line, planted area, pond edge, or protected surface.
More reach does not remove the need for a suitable setup position. Measure the horizontal distance from the proposed machine location to the branch, not from the nearest point where a person can stand. Add the work height, the branch position, and a simple site sketch to the inquiry so the supplier can compare the task with the model data.
Build a practical model shortlist
| Site input | What to record | Why it affects the shortlist |
|---|---|---|
| Work point | Vertical height and horizontal distance | Both working height and radius must suit the task. |
| Access route | Narrowest width, turns, slope, and surface | The machine must reach the setup area before work begins. |
| Platform load | People, tools, and materials | The listed load for these models is 200 kg. |
| Setup area | Available space and ground condition | The final configuration must suit the actual site. |
| Transport | Towing vehicle, route, and destination rules | Transport arrangements vary by market and job. |
If the required work point is within the range of more than one model, compare machine weight, platform size, access limits, power configuration, and the setup information in the current datasheet. The smallest model that satisfies every confirmed requirement may be easier to transport and position, but that decision should follow the complete site review.
Check access, towing, and setup information
A towable lift must complete the full route from delivery to setup. A wide entrance does not guarantee that the trailer can negotiate the next corner. Measure each restriction and include photos with a known scale. Confirm the towing vehicle, local towing rules, parking position, and storage plan with the responsible person.
Ground condition also matters. A level paved area, compacted surface, soft lawn, and sloped driveway present different constraints. Ask for the current machine dimensions and setup requirements for the selected configuration. Do not estimate the required setup area from the platform dimensions shown in the comparison table.
Specify the power and control configuration
The product information lists a 24 V, 192 Ah battery, a 4.5 kW pump motor, and an optional 2 kW generator. It also lists remote control, assisted walking, and optional gasoline, diesel, lithium battery, and AC configurations. Treat this as a list of available configuration topics, not a promise that every option applies to every model or destination.
Tell the supplier where the machine will work, how it will be moved between tasks, which energy source is practical at the site, and whether remote control or assisted walking is required. Ask the quotation to identify the exact configuration, included equipment, charging or fuel requirements, and the documents supplied with that model.
Prepare a complete request for quotation
A useful request allows the supplier to compare models without relying on guesswork. Include the following details:
- Required working height and horizontal distance from setup point to work point.
- Narrowest gate, driveway, turn, overhead clearance, and available setup space.
- Surface condition, slope information, and any protected areas around the machine.
- Expected number of people plus the weight of tools and materials on the platform.
- Preferred power arrangement and any requested control or movement options.
- Destination country, delivery location, purchasing schedule, and required documents.
- Site photos and a simple plan showing the road, access route, tree, obstacles, and proposed setup point.
Ask the quotation to state the model, main specifications, selected options, lead time, shipping basis, warranty terms, and included documentation. This creates a clearer comparison when more than one configuration is being considered.
Common questions about towable boom lifts for tree care
Which model has the greatest listed working height?
The T16 has the highest listed working height in this range at 17.85 m. It also has the greatest listed working radius at 6.6 m. Those figures do not replace a review of access, machine weight, setup position, and the actual work point.
Do all five models have the same platform capacity?
The current product information lists a 200 kg load capacity for the T08, T10, T12, T14, and T16. The planned load should include people, tools, and materials. Follow the limits on the machine and in its current manual.
Which models have the larger platform?
The T14 and T16 list a 1.2 x 0.7 m platform. The T08, T10, and T12 list a 0.9 x 0.7 m platform.
Is working height enough to select a model?
No. Horizontal working radius, access route, towing arrangements, machine weight, platform load, power configuration, ground condition, and setup requirements can all change the decision.
What should be sent with a model inquiry?
Send measurements, site photos, a sketch, the platform load, destination, preferred configuration, and purchasing schedule. For another comparison of articulated access equipment, read Spider Boom Lift vs. Regular Boom Lift.
Compare the Coman towable boom lift range
Review the full Towable Boom Lift specifications and the Towable Boom Lifts collection. When the measurements are ready, send the site details through the contact page and ask for a model-specific comparison.
-
Publicado en
Aerial Work Platform, Buying Guide, Towable Boom Lift, Tree Care
